Skip to main content

USB Console

USB Connector​

The DALION has a Mini-B USB connector. Once connected to a computer, access to a serial command-line interface is available.

Image of USB console

The command-line interface is accessible with serial console software such as PuTTY on a computer.

Several commands are available to view and change the settings, as well as to view system statistics.

Please note that strings cannot contain spaces.

Serial Console Settings​

NameValue
Speed (baudrate)115200
Data bits8
Stop bits1
ParityNone

Commands General​

help​

Lists the available commands.

version​

Displays the system version.

reboot​

Reboots the system.

factorydefault​

Clears all settings and commissioning data.

date​

Displays the date and time of the system.

ping​

Pings an IPv4 address. Follow this command with an IPv4 address.

status​

Displays the status of the system.

ip [addr|a]​

Displays the IP network information.
Ex.: ip a

Commands Statistics​

stip​

Displays the statistics of the IP network.

stbacnetip​

Displays the statistics of the BACnet/IP.

stdali​

Displays the statistics of the DALI.

stdalianalyzer [channel]​

Displays the statistics of the DALI analyzer for the specified channel.
Ex.: stdalianalyzer 1

sttcp​

Displays the statistics of the TCP network.

studp​

Displays the statistics of the UDP.

starp​

Displays the statistics of the ARP.

sticmp​

Displays the statistics of the ICMP protocol.

starptable​

Displays the ARP table.

steth​

Displays the Ethernet registers.

logread​

Displays the system log.

Commands System Settings​

setsystem​

Modifies the system settings. Follow this command with one of the following parameters. Follow the parameter with the value to assign.
Ex.: setsystem username admin

username​

Username (16 characters maximum).

password​

Password (16 characters maximum).

Commands IP Settings​

setip​

Modifies the IP settings. Follow this command with one of the following parameters. Follow the parameter with the value to assign.
Ex.: setip source static

source [static|dhcp]​

IP source, DHCP or static.
Ex.: setip source static

address​

IPv4 address.
Ex.: setip address 192.168.0.100

netmask​

Netmask.
Ex.: setip netmask 255.255.255.0

gateway​

Default gateway.
Ex.: setip gateway 192.168.0.1

speed [Auto|10F|10H|100F|100H]​

Link speed.
Ex.: setip speed auto

dns1​

First domain name server.
Ex.: setip dns1 8.8.8.8

dns2​

Second domain name server.

hostname​

Hostname (32 characters maximum).

Commands BACnet/IP Settings​

setbacnetip​

Modifies the BACnet/IP settings. Follow this command with one of the following parameters. Follow the parameter with the value to assign.
Ex.: setbacnetip deviceid 1000

deviceid​

The BACnet Device ID.
Ex.: setbacnetip deviceid 1000

devicename​

The BACnet Device name (32 characters maximum).
Ex.: setbacnetip devicename DALION

devicedescription​

The BACnet Device description (32 characters maximum).

devicelocation​

The BACnet Device location (32 characters maximum).

apdutimeout​

APDU timeout in milliseconds (default: 3000).

apduretries​

The number of APDU retries (default: 3).

udpport​

UDP Port (default: 47808).

bbmdip​

BBMD IPv4 address.

bbmdport​

BBMD UDP port.

fddelay​

Foreign device registration delay in seconds.